INSTALLING THE VTL VALUE APPLIANCE IN AN EQUIPMENT RACK

4.Using a level (D above), align the server with the rails, and insert the inner rails into the middle rails at the correct angle (E below).

E

5.Have an assistant stand at the rear of the rack.

6.As you push the server into the rack, the assistant makes sure that the inner rails are engaged with the ball-bearing retainers (F below) and sliding on the bearings on both slide rails.

The assistant makes sure that the rails are NOT merely pushing the ball-bearing retainers back into the rail assembly (G).

FG

7.If there are problems, support the server with the mechanical lift, and realign the chassis-mounted inner rails with the rack-mounted middle rails.

8.Once the inner rails are correctly engaged and riding on the bearings, slide the server all the way into the rack to set the rail locks.

316196101 • A

Chapter 1 Installing VTL Value hardware 15

Page 27
Image 27
Sun Microsystems EC000066 manual a Installing VTL Value hardware