Sun Microsystems EC000066 manual Routing and connecting cables, Installing data and power cables

CABLING

11.Placing your hand under the CMA for support, fit the two pins (M, N below) into the keyholes in the CMA-to-chassis bracket (P, Q) and rotate CMA towards you until it seats with an audible snap (R).

Q

P

M N

R

Next task: “Routing and connecting cables” on page 20.

Routing and connecting cables

Once you have racked the server and installed the cable management arm (CMA), you are ready to install cables, including:

■power cords

■Ethernet local area network (LAN) cables

■Fibre Channel storage area network (SAN) cables

Proceed as follows.

▼Installing data and power cables

1.On the cable management arm (CMA), pop the green tabs to open the cable hangers (A below).

20 VTL Value Hardware Installation Guide • Aug 2007 A • 316196101