INSTALLING THE VTL VALUE APPLIANCE IN AN EQUIPMENT RACK

3.Insert the oval-shaped neck of a temporary installation pin (E below) into the oval- shaped hole in rear mounting bracket of the outer slide-rail (F), and turn the pin clockwise 90 degrees, so that the pin locks into place in the 3 o’clock position.

F

E

Temporary installation pins are packed in a plastic bag, with the slide-rail hardware.

4.Standing at the front of the rack, position the rail and bracket (G below) so that you can draw the temporary installation pin (H) into the mounting hole in the rear rack post (J).

J

H

G

316196101 • A

Chapter 1 Installing VTL Value hardware

9

Page 21
Image 21
Sun Microsystems EC000066 manual 316196101 a