Chapter 3 | Section 3.5 |
Setting SAP BAPI eWay Properties | eWay External Properties |
Table 6 Inbound SAP BAPI eWay—Server Connection Settings
Name | Description | Required Value | |
|
|
| |
Router String | Specifies the router string needed to | A valid router string. | |
(optional) | access the SAP R/3 Application Server. |
| |
| This property is optional; use it only to | There is no default setting. | |
| gain access to an SAP system that is |
| |
| behind a firewall. |
|
|
| The string is composed of the |
| |
| hostnames or IP addresses of all the |
| |
| SAP routers that are in between this |
| |
| logical host and the SAP gateway host. |
| |
| For example, if there are two routers, |
| |
| saprouter1, and saprouter2, in order, |
| |
| from the Logical Host to the SAP R/3, as |
| |
| follows: |
|
|
| saprouter1: | 204.79.199.5 |
|
| saprouter2: |
|
|
| 207.105.30.146 |
|
|
| The router string in this case is as |
| |
| follows: |
|
|
| /H/204.79.199.5/H/ |
| |
| 207.105.30.146/H/ |
|
|
| Do not omit the “/H/” tokens to begin, |
| |
| separate, and end the routers. |
| |
|
|
| |
Gateway Service | Specifies the gateway service of | The SAP recommended value | |
| SAP R/3 |
| is the string sapgw |
| The gateway service of the SAP R/3 | concatenated with the SAP | |
| system sends transactions. | system number. For example, | |
|
|
| if the system number is 00, the |
|
|
| gateway service is sapgw00. |
|
|
| There is no default setting. |
|
|
| |
Program ID | Specifies the Program ID used to | Program ID is shown in the | |
| register the SAP JCo server of the eWay | SAPGUI transaction SM59. | |
| with SAP R/3. |
| This entry must match the |
|
|
| SAPGUI exactly; this entry is |
|
|
| case sensitive. |
|
|
| There is no default setting. |
|
|
| |
Application Server | Specifies the host name of the SAP R/3 | Any valid Hostname. | |
Hostname | application server. |
|
|
|
|
| There is no default setting. |
|
|
|
|
eWay™ Adapter for SAP BAPI User’s Guide | 33 | Sun Microsystems, Inc. |