Chapter 3 | Section 3.5 |
Setting SAP BAPI eWay Properties | eWay External Properties |
Table 8 Outbound SAP BAPI eWay— Client Connection Settings
Name | Description | Required Value |
|
|
|
Router String | Specifies the router string needed to | A valid router string. |
(optional) | access the SAP R/3 Application |
|
| Server. | There is no default setting. |
| This property is optional; use it only |
|
| to gain access to an SAP system that |
|
| is behind a firewall. |
|
| The string is composed of the |
|
| hostnames or IP addresses of all the |
|
| SAP routers that are in between this |
|
| logical host and the SAP gateway |
|
| host. For example, if there are two |
|
| routers, saprouter1, and saprouter2, |
|
| in order, from the Logical Host to the |
|
| SAP R/3, as follows: |
|
| saprouter1: |
|
| 204.79.199.5 saprouter2: |
|
| 207.105.30.146 |
|
| The router string in this case is as |
|
| follows: |
|
| /H/204.79.199.5/H/ |
|
| 207.105.30.146/H/ |
|
| Do not omit the “/H/” tokens to |
|
| begin, separate, and end the routers. |
|
|
|
|
Connection Retry Settings
The following Connection Retry Settings are used:
Table 9 Outbound SAP BAPI eWay—Connection Retry Settings
Name | Description | Required Value |
|
|
|
Connection Retries | Number of retries to establish a | The default is 0. |
| connection upon failure to acquire |
|
| one. |
|
|
|
|
Connection Retry Interval | Milliseconds of pause before each | The default is 1000. |
| reattempt to access the SAP system. |
|
| Used in conjunction with the |
|
| 'Connection Retry Count' setting. |
|
|
|
|
Connection Pool Settings
The following Connection Pool Settings are used by the external database:
eWay™ Adapter for SAP BAPI User’s Guide | 37 | Sun Microsystems, Inc. |
