Chapter 10 Troubleshooting 10-7
■SunVTS TestReference Manual provides details about each individual SunVTS test.
10.1.3.4 Using the SunVTS Graphical User Interface
Totest the Sun Fire V120 or Netra 120 server by running a SunVTS session from a
workstation using the SunVTS graphical user interface, follow the procedure below.
1. Use the xhost command to give the remote server access to the local display.
Type:
2. Remotely log in to the server as superuser or root.
3. Type:
where local_hostname is the name of the workstation you are using.
Note – The directory /opt/SUNWvts/bin is the default directory for SunVTS
software. If you have the software installed in a differentdirectory, use that path
instead.
When you start SunVTS software, the SunVTS kernel probes the testsystem devices
and displays the results on the TestSelection panel. There is an associated SunVTS
test for each hardware device on your system.
Youcan fine-tune your testing session by selecting the appropriate check boxes for
each of the tests you want to run.
#/usr/openwin/bin/xhost + remote_hostname
# cd /opt/SUNWvts/bin
# ./sunvts -display local_hostname:0