11.6Replacing the System Board

Caution The procedure below is for the attention of qualified service engineers only. Before touching or replacing any components inside the server, disconnect all cables and follow the instructions in Section 4.2, “Opening the Server” on page 4-4 which tell you how to open the server. Always place the server on a grounded ESD pad and wear a properly grounded antistatic wrist strap.

To perform the steps in this section, you need a 5mm nut-spinner to remove and replace the SCSI pillars on the rear of the chassis.

11.6.1Removing the Old System Board

1.Open the server by following the instructions in Section 4.2, “Opening the Server” on page 4-4.

Make sure all external cables are disconnected and pay particular attention to the information about how to prevent electro-static discharge from your body from damaging the components of the server.

2.With the server open and seated on top of an ESD pad, and with a properly grounded antistatic wrist strap on your wrist, do the following:

a.Disconnect all power supply cables from the system board.

b.Disconnect the DVD or CD-ROM ribbon cable from the system board.

c.Disconnect the memory card reader cable from the system board.

3.Remove the server’s front bezel.

4.Remove the hard disk drives in the server (see Section 4.1, “Installing and Removing Hot-Pluggable SCSI Hard Disk Drives” on page 4-2).

5.Remove the PCI card if you have one installed (see Section 4.6.2, “Removing a PCI Card” on page 4-14).

6.Remove the DIMMs from their slots (see Section 4.5, “Installing and Removing Memory” on page 4-9).

7.Remove the rear fan subassembly (see Section 11.8, “Replacing the Rear Fan Subassembly (Fans 1 and 2)” on page 11-19).

11-12Sun Fire V120 and Netra 120 Server User’s Guide • December 2001

Page 166
Image 166
Sun Microsystems V120 manual Replacing the System Board, Removing the Old System Board

V120, 120 specifications

Sun Microsystems' V120 and 120 servers emerged as robust solutions in the early 2000s, catering primarily to small to medium-sized enterprises and branch offices. These servers were built to deliver reliable performance, ease of use, and efficient resource management, making them appealing choices for organizations aiming to balance performance with budgetary constraints.

One of the standout features of the Sun V120 server was its UltraSPARC III processor architecture. This powerful processing capability provided substantial improvements in processing power and energy efficiency, allowing users to run demanding applications and serve multiple users without a hitch. The UltraSPARC III architecture supported a 64-bit computing environment, enabling better memory utilization and rapid execution of high-volume transactions.

In terms of memory, the V120 could accommodate up to 32GB of DDR SDRAM. This significant memory capacity allowed for enhanced performance in data-intensive applications, facilitating smoother multitasking and reduced response times. The server supported dynamic reconfigurability, which meant system resources could be adjusted on-the-fly without shutting down operations, thus ensuring minimal downtime.

Storage solutions on the V120 were flexible and optimized for various requirements. The server offered options for internal hard drives for local storage, as well as configurations that supported external storage systems, providing users with a variety of scalability options. The inclusion of multiple SCSI and IDE interfaces allowed for better integration with existing IT infrastructure.

Networking capabilities in the V120 included integrated Ethernet interfaces, which supported both Fast Ethernet and Gigabit Ethernet options. This ensured seamless connectivity and sufficient bandwidth for network applications, while the server’s compact design made it easy to deploy within existing setups.

As for its operating systems, the V120 was compatible with Solaris, Sun's flagship UNIX-based operating system, which was celebrated for its scalability and reliability. Organizations could also run Linux distributions, further broadening the server's appeal and making it versatile for varied workloads.

Additionally, the V120’s design prioritized energy efficiency, which helped companies reduce operating costs and their environmental footprint. The server’s compact form factor allowed for efficient cooling and reduced space requirements.

In conclusion, the Sun V120 server, alongside the V120 model, represented a marriage of advanced technology, expansive features, and flexible deployment options. It provided businesses with a dependable platform for various applications, establishing itself as a valuable tool for organizations looking to leverage the power of enterprise computing without exorbitant costs.