Sun Microsystems V120 manual Appendix C Configuring the LOM Device Driver C-5

TABLE C-1LOM Configuration File Parameters (Continued)

Field	Format	Default	Effect
serial_timeout=	Multiples	0	Specifies the idle period after
	of 4 secs		which the LOM device gives
			control of the Serial A/LOM
			port back to the console when it
			has finished sending a report.
			By default, there is no delay at
			all. If you enable the
			serial_return= option , the
			serial_timeout= option
			specifies the period that the
			LOM waits after each LOMlite
			command before giving control
			of the Serial A/LOM port back
			to the console. By default, there
			is no delay.
serial_return=	Boolean	0	Causes the LOM to return the
	0=FALSE		user to the console from the
	1=TRUE		lom> prompt after each LOM
			shell command. You can use
			this option in conjunction with
			the serial_timeout= option.
reporting_level=	Number	3	The severity level down to
	between 0		which you want to see LOM
	and 4		event reports. 0 means no
			reports. 1 means Fatal event
			reports only. 2 means Fatal and
			Warning event reports. 3 means
			Fatal, Warning and Information
			event reports. 4 means Fatal,
			Warning, Information and User
			event reports. (User event
			reports concern the user

security facility, you will not see any unless you have enabled the security facility and set up users.)

Each parameter must be on a separate line and must befollowed by an equals sign (=) and a value, without spaces. Where the format is Boolean, 1 means true and 0 means false.

Appendix C Configuring the LOM Device Driver C-5