Sun Microsystems 120, V120 - page 46

3-8 Sun Fire V120 and Netra 120 Server User’s Guide • December 2001
FIGURE3-7 Routing the WiresOut of the Strain Relief Housing
3. Insert the tie wrap into the bottom portion of the strain relief housing (see
FIGURE3-8).
FIGURE3-8 Securing the Wiresto the Strain Relief Housing
4. Loop the tie wrap over the wires and back out of the strain relief housing and
tighten the tie wrap to secure the wires to the strain relief housing (see FIGURE3-8).
5. Position the top portion of the strain relief housing so that the three prongs on the
top portion fitinto the openings in the DC connector, and push them together
until they snap into place (see FIGURE3-9).