Sunfire X Series DIMENSIONS AND SPECIFICATIONS continued, Introduction, Rating Plate, Model #

Models: X Series

1 44
Download 44 pages 41.34 Kb
Page 5
Image 5
DIMENSIONS AND SPECIFICATIONS continued

DIMENSIONS AND SPECIFICATIONS continued

Base Model Designations & Total Input Rates

 

 

Input BTU/Hr

Model #

Description

Natural

Propane

 

 

Gas

Gas

X24-4S

24” (610mm) nominal size unit, 4 open burners, storage base

120,000

104,000

 

 

 

 

X24-4L

24” (610mm) nominal size unit, 4 open burners, space saver oven

145,000

129,000

X36-6S

36” (914mm) nominal size unit, 6 open burners, storage base

180,000

156,000

 

 

 

 

X36-6R

36” (914mm) nominal size unit, 6 open burners, standard oven

213,000

185,000

 

 

 

 

X60-10SS

60” (1524mm) nominal size unit, 10 open burners, 2 storage bases

300,000

260,000

X60-10RS

60” (1524mm) nominal size unit, 10 open burners, standard oven, storage base

333,000

289,000

 

 

 

 

X60-10RR

60” (1524mm) nominal size unit, 10 open burners, 2 standard ovens

366,000

318,000

 

 

 

 

X60-6R24SS

60” (1524mm) nominal size unit, 6 open burners, 24” (610mm) Raised Griddle/Broiler,

203,000

189,000

2 storage bases

 

 

 

X60-6R24RS

60” (1524mm) nominal size unit, 6 open burners, 24” (610mm) Raised Griddle/Broiler,

246,000

218,000

standard oven, storage bases

 

 

 

 

 

 

 

X60-6R24RR

60” (1524mm) nominal size unit, 6 open burners, 24” (610mm) Raised Griddle/Broiler,

279,000

247,000

2 standard ovens

 

 

 

 

 

 

 

Rates are for installations up to 2000’ (610m) above sea level

 

 

INTRODUCTION

1.Check crate for possible damage sustained during transit.. Carefully remove unit from crate and again check for damage.. Any damage to the appliance must be reported to the carrier immediately..

2.The wires for retaining packing material must be removed from units.. Any protective material covering stainless steel parts must also be removed..

3.All equipment is supplied with 6” (152mm) legs unless specified to be dais for cove base mounting, casters or deck mount flanged feet.. 60” (1524mm) wide units have legs factory mounted.. Base mounting is required when range is being installed on a combustible floor..

4.The type of gas and supply pressure that the equipment was set-up for at the factory is noted on the rating plate and on the packaging.. This type of gas supply must be used..

5.Do not remove permanently affixed labels, warnings or rating plates from the appliance, for this may invalidate the manufacturer’s warranty..

Rating Plate

All burner input rates are shown on the rating plate, which is located behind the lower front drop down panel under the oven door..

Part # 4523343 Rev 1 (02/12/08)

Page

Page 5
Image 5
Sunfire X Series DIMENSIONS AND SPECIFICATIONS continued, Introduction, Base Model Designations & Total Input Rates