7-8

SUPERSERVER 5017P-TLN4F/TF User's Manual
Advanced Chipset Control
WARNING: Setting the wrong values in the following sections may cause
the system to malfunction.
System Agent (SA) Conguration
This submenu allows you to congure System Agent Parameters.
Memory Conguration
This section displays memory status such as memory speed and total memory.
Memory Frequency Limiter
Use this item to select the maximum memory frequency (in Mhz). The options
are Auto, 1067, 1333, 1600, 1867, 2133, 2400, and 2667.
DDR Selection
Use this item to select the type of DDR. The options are DDR3,
DDR3L, and Auto.
DDR Reset Wait Time
Enter the amount of time (in nano seconds) to wait for switch DDR voltage.
The minimum value is 20ns. The default value is 2000000.
ECC Support
Select Enabled to support ECC. The options are Enabled and Disabled.
Memory Scrambler
Select Enabled to support Memory Scrambler. The options are Enabled and
Disabled.
VT-d
Select Enabled to enable Intel's Virtualization Technology support for Direct I/O
VT-d by reporting the I/O device assignments to VMM through the DMAR ACPI
Tables. This feature offers fully-protected I/O resource-sharing across the Intel
platforms, providing the user with greater reliability, security and availability in
networking and data-sharing. The settings are Enabled and Disabled.
PEG0 - Gen X
This feature selects the speed of the PEG0 port. The options are Auto, Gen1,
Gen2, and Gen3.