Chapter 6: Advanced Chassis Setup
6-3 Removing the Chassis Cover
13
12
12
12
Figure 6-2. Removing the Chassis Cover
Removing the Chassis Cover
1.Power down the system and disconnect the power cord from the back of the power supply.
2.Remove the five screws that hold the chassis cover in place. There are two screws on each side of the chassis, and one screw on the back.
3.Once the screws have been removed, lift the cover upward to remove it from the chassis.
Caution: Except for short periods of time, do NOT operate the server without the cover in place. The chassis cover must be in place to allow proper airflow and prevent overheating.
