7-16

SUPERSERVER 5017P-TLN4F/TF User's Manual
Compliance SOS (Available when supported by the hardware)
When set to Enabled, this feature will force LTSSM to send SKP ordered sets
between sequences when sending compliance pattern or modied compliance
pattern. The options are Disabled and Enabled.
Hardware Autonomous Width (Available when supported by the
hardware)
When set to Disabled, this feature disables the hardware's ability to change link
width (except width size reduction) for the purpose of correcting unstable link
operation. The options are Enabled and Disabled.
Hardware Autonomous Speed (Available when supported by the
hardware)
When set to Disabled, this feature disables the hardware's ability to change link
speed (except speed size reduction) for the purpose of correcting unstable link
operation. The options are Enabled and Disabled.
PCI-E Slot 1 Option ROM
Use this feature to enable or disable PCI-E slot 1 Option ROM. The options are
Disabled and Enabled.
Onboard LAN Option ROM Select
This feature selects whether to load the iSCSI or PXE onboard LAN option ROM.
The options are iSCSI and PXE.
Onboard LAN 1 ~ LAN 4
Use this item to enable or disable onboard LAN for the specied port. The options
are Enabled and Disabled.
Load Onboard LAN 1 ~ LAN 4 Option ROM
This feature is to enable or disable the onboard option ROMs. The options are
Disabled and Enabled. The default for LAN 1 is Enabled. Default for LAN 2 ~ LAN
4 is Disabled.
Network Stack
Set this item to Enabled to activate the Network Stack (PXE and UEFI). The options
are Enabled and Disabled. When enabled, the following options appear:
Ipv4 PXE Support
This feature enables Ipv4 boot support. If disabled, an Ipv4 PXE boot option
will not be created. The options are Enabled and Disabled.