SUPERSERVER
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside the VGA port) have two LEDs. On each port, the yellow LED flashes to indi- cate activity while the other LED may be green, amber or off to indicate the speed of the connection. See the table on the right for the functions associ- ated with the connection speed LED.
Standby Power LED (LED1)
An Onboard Power LED is located at LED1 on the motherboard. When LED1 is on, the AC power cable is connected and the power supply hard switch is on. The system may be on standby or running.
IPMI Heartbeat LED (LED2)
An IPMI Heartbeat LED is located at LED2. When LED2 blinks, it means that IPMI is enabled and function- ing properly. For the
Overheat / Fan Fail (LED3)
LED3 is located next to the VGA port. This indicator alerts of either a Fan Failure, or System Overheat.
LAN1/2 LED
(Connection Speed Indicator)
LED Color |
| Definition |
Off |
| NC or 10 Mbps |
| ||
Green |
| 100 Mbps |
| ||
Amber |
| 1 Gbps |
| ||
|
|
|
Onboard PWR LED (LED1)
LED Status
| Status |
| Definition | |
| Off |
| System Off (Soft Switch) |
|
|
|
| ||
| On |
| Power is Detected |
|
|
|
|
|
|
IPMI Heartbeat LED (LED2)
LED Settings
Status |
| Definition |
Green: Blinking |
| IPMI is ready for use |
| ||
Off |
| IPMI Disabled |
|
|
|
OH/Fan Fail LED Indicator (LED3)
LED Settings
Status |
| Definition |
Yellow: Blinking with |
| Fan Failure |
| ||
continuous beep |
|
|
Yellow: Solid with |
| System Overheat |
continuous beep |
|
|
Off |
| Normal |
|
|
|
