SUPER MICRO Computer 6012L-6 user manual Third Power Supply Fail Header, Wake-On-LAN, Sleep Button

SUPERSERVER 6012L-6 User’s Manual

Third Power Supply Fail Header

The JP46 header with the proper cable attached can provide warn- ing of power supply failure. The warning signal is passed through the PWR_LED pin on JF1 to pro- vide indication of a power failure on the chassis.

Note: This feature is only avail- able when three using Supermicro power supplies and so does not apply to the 6012L-6 server. See the table on the right for pin defini- tions.

T hird P o w e r S up p ly F a il H e a d e r

P in D e finitio ns (J P 4 6 )

Pin
Number	Definition
1	P/S 1	Fail S ignal
2	P/S 2	Fail S ignal
3	P/S 3	Fail S ignal
4	Reset (from MB)

Wake-On-LAN

The Wake-On-LAN header is des- ignated as WOL. See the table on the right for pin definitions. You must enable the LAN Wake-Up set- ting in BIOS and also have a LAN card with a Wake-on-LAN connec- tor and cable to use this feature.

Sleep Button

The header designated J10 (near the BIOS chip) allows you to con- nect a push button to the motherboard that will put the sys- tem in a suspend mode (S1) when depressed.

Wa k e -O n -L A N P in D e finitio ns (W O L )

P in
N umber	D efinition

1+5V Standby

2G round

3W ake-up

5-16