SUPER MICRO Computer 6012L-6 Connecting the Control Panel, P4DLR+ Front Control Panel Header Pins

SUPERSERVER 6012L-6 User’s Manual

Connecting the Control Panel

JF1 contains header pins for various front control panel connectors. See Figure 5-3 for the pin locations of the various front control panel buttons and LED indicators. Please note that even and odd numbered pins are on opposite sides of each header.

All JF2 wires have been bundled into single ribbon cable to simplify their connection. Make sure the red wire plugs into pin 1 as marked on the board. The other end connects to the Control Panel printed circuit board, located just behind the system status LEDs in the chassis.

See the Connector Definitions section for details and pin descriptions of JF1.

Figure 5-3. P4DLR+ Front Control Panel Header Pins

NMI

X

Power LED

HDD LED

NIC1 LED

NIC2 LED

Overheat LED

Power Fail Button

G round

G round

	JF 1
20	19
	G round
	X
	Vcc

Vcc

Vcc

Vcc

Vcc

Vcc

Reset Reset Button

Pwr Power Button

2 1

5-6