SUPER MICRO Computer SUPER X5DLR-8G2+, SUPER X5DL8-GG user manual Motherboard Features, Cpu

SUPER X5DL8-GG/X5DLR-8G2+/X5DLR-8G2 User’s Manual

Motherboard Features

CPU

•Single or dual Intel® XeonTM 1.50 - 3.20 GHz 604/603-pin processors with a 1 MB cache at a front side (system) bus speed of 533/400 MHz.

Note: Please refer to the motherboard specifications pages on our web site for updates

on supported processors (http://www.supermicro.com/Product_page/product-m.htm).

Memory

•X5DL8-GG: Eight 184-pin DIMM sockets supporting up to 16 GB of registered ECC DDR-266/200 (PC2100/1600) SDRAM

•X5DLR-8G2+/X5DLR-8G2: Six 184-pin DIMM sockets supporting up to 12 GB of registered ECC DDR-266/200 (PC2100/1600) SDRAM

Note: Memory is 2-way interleaved meaning DIMM modules must be installed two at a time.

Chipset

•ServerWorks Grand Champion LE

Expansion Slots
• X5DL8-GG	• X5DLR-8G2+/X5DLR-8G2
One 64-bit 133 MHz	One 64-bit 133 MHz
Five 64-bit 100 MHz PCI-X

Note: These are the default settings. Most PCI slots share a bus, which may impose speed limitations. See the PCI-X Bus Speed jumper setting in Chapter 2 for details.

BIOS

•4 Mb AMI® Flash ROM

PC Health Monitoring

•Onboard voltage monitors for 2 CPU cores, chipset voltage, +5V, +12V, +3.3V and 5V standby

•Fan status monitor with firmware/software on/off control

•Environmental temperature monitor and control

•CPU fan auto-off in sleep mode

•Power-up mode control for recovery from AC power loss

•System overheat LED and control

•System resource alert

•IPMI 1.5 compliant (IPMI socket on board, daughter card required, X5DL8-GG only)

1-10