SUPER MICRO Computer SUPER X5DLR-8G2+ user manual X5DL8-GG Quick Reference, Connector Description

			Chapter 1: Introduction
	X5DL8-GG Quick Reference
Jumper	Description		Default Setting
J29	33 MHz PCI Enable/Disable		Open (Disabled)
J35	Spread Spectrum		Open (Disabled)
JA4	SCSI Enable/Disable		Pins 1-2 (Enabled)
JBT1	CMOS Clear		See Chapter 2
JP2	PCI 3.3V Standby En/Dis		Pins 1-2 (Disabled)
JP3	Watch Dog		Pins 2-3 (NMI)
JP4	GLAN2 Enable/Disable		Pins 1-2 (Enabled)
JP7	Main Power Override		Open (Normal)
JP12	System Bus Speed		Pins 1-2 (Auto)
JP48	Chassis/Overheat Fan Select		Open (Overheat)
JP54	GLAN1	Enable/Disable	Pins 1-2 (Enabled)
JP56	VGA Enable/Disable		Pins 1-2 (Enabled)
JP58	Fan Detection Select		Open (CPU Fan)
JPA1/A2	SCSI Channel A/B Termination		Open (Terminated)
P1/2, S1/2	PCI-X Speed Settings		See Section 2-8
Connector		Description
ATX POWER		Primary ATX Power Connector
BANK1A-BANK4B		Memory (RAM) Slots
COM1/COM2		COM1/COM2 Serial Port Connector/Header
CPU1/CPU2		CPU 1 and CPU2 Sockets
CPU/CHS/OH FAN		CPU/Chassis/Overheat Fan Headers
D1-D8		Debug LEDs
GLAN1/GLAN2		Ethernet Ports
J1		USB2/3 Headers
J11		PS/2 Keyboard/Mouse Ports
J12		Floppy Disk Drive Connector
J18, J19		IDE #1/#2 Hard Disk Drive Connectors
J20/J21		IPMB/SMB Headers
J56		Processor Power Connector
J65		Parallel Printer Port
J219		IPMI Slot (for IPMI daughter card)
JA1/JA2		Ultra320 LVD SCSI CH A/B Connector
JF1		Front Control Panel Connector
JF2		Speaker/HD LED Connectors
JP46		Third Power Supply Fail Header
JP57		Chassis Intrusion Header
USB0/1		Universal Serial Bus Ports
VGA		VGA Display (Monitor) Port
WOL		Wake-on-LAN Header
		1-7