SUPER MICRO Computer SUPER X5DLR-8G2+, SUPER X5DL8-GG user manual IDE Configuration

SUPER X5DL8-GG/X5DLR-8G2+/X5DLR-8G2 User’s Manual

Serial Port 2 Mode

Use this option to choose the Serial Port 2 Mode. The settings are Normal, Sharp-IR, SIR and consumer.

Parallel Port Address

This option specifies the I/O address used by the parallel port. The settings for this item include Disabled, 378, 278 and 3BC. Select your setting and then press "Enter".

Parallel Port IRQ

This option allows the user to set the Parallel Port IRQ. The settings for this item include 5 and 7.

Parallel Port Mode

This option specifies the parallel port mode. The settings for this item include Normal, Bi-directional, EPP and ECP.

ECP Mode DMA Channel

This option allows the user to set the setting for the ECP Mode of the DMA Channel. The settings for this item include 0, 1 and 3.

IDE Configuration

Onboard PCI IDE Controller

This option allows the user to enable or disable the integrated IDE Control- ler. The settings include Disabled, Primary, Second and Both. Select "Dis- abled" to disable the Integrated IDE Controller. Select "Primary" to enable the Primary IDE ontroller only. Select "Secondary" to enable the Secondary IDE Controller only. Select "Both" to enable both Primary and Secondary IDE Controllers.

4-6