Peripherals | TANDBERG Videoconferencing System |
Video Cassette Recorder (VCR)
VCR - Playback
TIP
Video
Codec: Video Input 4 (VCR)
VCR: Video Output
TO SIMPLIFY CONNECTING A VCR, THE NECESSARY CONNECTORS ARE MARKED ‘VCR’
Audio
Codec: Audio Input 4 (VCR)
VCR: Audio Output
For playback, connect a cable between Video Out on the VCR and ‘VideoIn 4 (VCR)’ on the system. Connect a cable between Audio Out on the VCR and the VCR audio input on the system.
vcr
Press VCR to activate the VCR input.
Make sure that ‘Audio In 4 (VCR)’ is On (see ‘Audio Settings’). If audio from VCR is too low, this level can be adjusted in ‘Audio Settings’, ‘Inputs’, ‘Level Settings’. The audio from the VCR will be audible in the local speaker system.
The audio from the VCR and your microphone(s) will be mixed and sent to the far end. When a person talks on either local or far end, the VCR audio level will be reduced to make it easier to comment on a video recording when ‘Audio Settings’, ‘Mix Mode: Auto’.
VCR - Recording
When recording, the VCR will record the video as it appears on the main monitor, the local audio and the audio from the far end.
When recording a videoconference, connect a cable between ‘VideoOut 3’ on the system and Video In on the VCR. Connect a cable between ‘AudioOut 3’ on the system and Audio In on the VCR.
Video
Codec: Video Output 3
VCR: Video Input
Audio
Codec: Audio Output 3
VCR: Audio Input
100
