TANDBERG D12155-10 user manual Dual Monitor, XGA monitor

Peripherals TANDBERG Videoconferencing System

Dual Monitor

It is possible to install the system in a Dual Monitor configuration.

The Dual Monitor option consists of an additional monitor, bigger cabinet top-plate and associated cabling.

The Dual Monitor can be used to show full screen selfview, snapshots and Duo Video.

To use the system in the Dual Monitor configuration:

•Connect ‘Video Out 2’ (preferably) otherwise 4 on the system to a video input on the dual monitor.

•Set ‘Dual Monitor: On’ in ‘Utilities’ menu.

Alternatively you can use a PC monitor as your second monitor:

•Connect ‘VGA Out’ on the system to your PC monitor.

•Set ‘VGA Out: Dual’ in ‘VGA Settings’ menu.

XGA monitor*

The TANDBERG 2500 can be delivered with XGA monitors as an option. This will allow you to display XGA images on your Dual Monitor.

•Connect ‘VGA Out’ on the system to your XGA monitor.

•Set ‘VGA Out: Dual’ in ‘VGA Settings’ menu.

•Connect the control cable from Dataport1 to the control input on the XGA monitor. The system will select video input or XGA input based on signals sent from the system.

NOTE IT IS NOT POSSIBLE TO USE T.120 IF THE XGA CONTROL CABLE IS CONNECTED SINCE DATAPORT 1 IS OCCUPIED.

* - Optional

96