Advanced use | TANDBERG Videoconferencing System |
Dataport 2
Dataport 2 is dedicated to the main camera and will not be available in standard configuration.
The Codec will automatically detect WAVE cameras. If you are using a camera supporting the VISCA protocol, select ‘Mode: VISCA’. The Dataport 2 settings will then be enabled.
If ‘Mode: Auto’ and no camera is connected to the Dataport 2, the Baudrate, Parity, Databits and Stopbits settings will be enabled.
For more details on connecting to the Dataport, see ‘Peripheral Equipment’.
88
