TANDBERG D12155-10 user manual Video Settings, Camera Tracking Mode, Document Camera

TANDBERG Videoconferencing System Advanced use

Video Settings

NOTE

THE CAMERA TRACKING MODE ENTRY WILL

NOT BE AVAILABLE IF NOT USING THE WAVE

CAMERA.

Camera Tracking Mode

Select the camera tracking mode:

Slow: The system waits a while before zooming in on a single person speaking. Suitable when wide-angle images are preferred over close-up images.

Norm: Should be used in regular meetings.

Fast: The system quickly zooms in on a single person speaking. Suitable when close-ups are preferred over wide-angle images.

Document Camera

Users of a document camera with an S-video output can configure the system to activate an S-video input when pressing ‘doc cam’ on the remote control.

Video2: Video Input 2 (S-video) will be activated when pressing ‘doc cam’ on the remote control.

Video3: Video Input 3 (Composite) will be activated when pressing ‘doc cam’ on the remote control.

PC*

Configure what should be activated when pressing PC.

VGA: Pressing PC will activate the VGA input on the system (default).

VNC: Pressing PC will use VNC to show images from your PC (see ‘VNC Settings’ for further information).

* - Requires option ‘Presenter’. To check which options are installed, see the ‘System Info’ menu in ‘Diagnostics’.

65