You can choose from among the following three delay types.
L - R | |
|
|
Mono | Mono delay |
|
|
Diff | Diffusion delay |
|
|
4)Rotate the [MENU/ENTER] knob to select the desired delay type and press the [MENU/ENTER] knob.
The selected delay type is set, while the display returns to the previous screen.
5)Press the [STOP] key to quit the menu mode.
MR-8HD
Adjusting the effect send levels
To apply the effect (reverb or delay) to tracks 1 through 4, adjust the [EFFECT SEND] con- trol for each track to adjust the level of the track signal sent to the effect processor.
In the example as illustrated below, tracks 1 and 2 signals are sent to the effect processor.
EFFECT SEND
0 | 10 | 0 | 10 | 0 | 10 | 0 | 10 |
Adjusting the delay/reverb time
You can adjust the reverb time or delay time using the [REVERB/DELAY TIME] control, de- pending on the selected effect type.
EFFECT | |
REVERB / DELAY TIME | |
MIN | MAX |
ROOM | HALL [REVERB / DELAY TIME] control |
PLATE | DELAY |
HALL | Adjusts the reverb time within the range between | |
1.0 s and 6.0 s (center position: 3.0 s) | ||
| ||
|
| |
ROOM | Adjusts the reverb time within the range between | |
0.1 s and 2.0 s (center position: 1.0 s) | ||
| ||
|
| |
PLATE | Adjusts the reverb time within the range between | |
| 0.5 s and 4.0 s (center position: 2.0 s) | |
DELAY | Adjusts the delay time within the range between | |
| 100 ms to 1000 ms (center position: 300 ms) | |
|
|
As shown in the signal flowchart below, a track (playback) signal after the track fader is fed to the [EFFECT SEND] control and adjusted, then fed to the effect processor input.
The effect processor's stereo output signals (wet signals) and stereo (L/R) signals (dry sig- nals) are merged together and then output from the [STEREO OUT] jacks.
As you can see in the flowchart below, the signal sent to the effect processor is affected by the track fader (i.e. a track fader must be raised to send track signal to the effect pro- cessor). The signal which passes through a fader is generally called a "post fader signal".
<Signal flow from a track to the effect processor (only Track 1~ 4)>
STEREO BUSS
1 |
|
|
|
|
Playback |
|
|
|
|
Dry sound |
|
|
| |
Track 1 |
| PAN | L | R |
|
|
| ||
| L | R |
|
|
| EFFECT SEND |
|
|
|
0 | 10 |
|
|
|
Adjusts the track |
|
|
|
|
playback level | Delay |
|
|
|
|
|
|
| |
| or |
|
|
|
Adjusts the send level to the | Reverb |
| Wet sound |
|
effect processor |
|
|
| |
| 61 |
|
|
|
