<Note>: Track 1 and 7/8 faders are used to adjust the monitor level. To adjust the re- cording levels, use the [TRIM] controls of the [INPUT A] and [INPUT B] channels.
5)Press the [RECORD] key once (the key indicator starts flashing).
The armed tracks 7/8 now enter the input
monitor mode, while "
" is shown on the home screen.
Starting recording
9)While holding down the [RECORD] key, press the [PLAY] key to start recording.
The recorder records the keyboard while playing back track 1 (guitar).
10)When recording completes, press the [STOP] key to stop the recorder.
<Note>: We recommend to press the [REC SELECT] key for tracks 7/8 to unarm tracks 7/8.
Adjusting the recording levels while listening to track 1
6)Press the [PLAY] key to play back the song from the beginning.
Though tracks 7/8 are in the input monitor mode, you can hear the track 1 signal by rotating the [PHONES VOL] control clockwise (while the meter for track 1 shows the playback level).
Playing back the recorded track
11)Press the [REWIND] key while holding down the [STOP] key to locate the recorder to the beginning of the song.
12)Press the [PLAY] key to start playback.
You can adjust the monitor level using the track faders, as well as the [MASTER] fader and [PHONES VOL] control.
<Note>: If you are not satisfied with the re- sult, use the undo/redo function to cancel the recording and try again.
7)While playing the keyboard, adjust the recording levels using the [TRIM] controls of the [INPUT A] and [INPUT B] channels.
Adjust the levels appropriately so that the PEAK indicators for these input channels do not light.
The home screen shows the playback level of track 1 and the input levels of tracks 7 and 8, as well as the stereo L and R output levels.
Undoing recording (undo/redo)
If you press the [UNDO/REDO] key after finishing recording, you can return to the condition before the recording started (UNDO operation). Therefore, you can try recording again.
If you press the [UNDO/REDO] key again (after UNDO), the undo operation is canceled and you can return to the condition when the recording finished (REDO operation).
BOUNCE
MENU / ENTER
MASTERING
LOCATE |
|
|
B / OUT | STORE | UNDO/REDO |
[UNDO/REDO] key
YZ9
<Note>: Adjust each [TRIM] control prop- erly so that the corresponding PEAK indi- cator does not light at the loudest part of the keyboard sound.
PLAY | REWIND | F FWD |
END |
|
|
ZERO |
|
|
<Tip>: When receiving a line level signal, set the [TRIM] control to left ("LINE") to get the appropriate level. When receiving a micro- phone signal, set the [TRIM] control to right ("MIC") to get the appropriate level.
8)After adjusting the recording levels properly, press the [REWIND] key while holding down the [STOP] key to locate the recorder to the beginning of the song.
<Notes>: The undo/redo function is available for all kind of recordings, however, if you carry out any of the following operations after making re- cording, you cannot undo the recording.
•Carrying out new recording.
•Carrying out track or part editing.
•Turning off the power.
•Selecting another song or editing the song name.
38
