
<Note>: You cannot select the same track(s) for the move source and destination.
8)Rotate the [MENU/ENTER] knob to select the destination track(s), and press the [MENU/ENTER] knob.
The display returns to the screen where "Dest. Track = *" is highlighted.
9)Rotate the [MENU/ENTER] knob to move the cursor to "[ENTER]" on the screen, and press the [MENU/ENTER] knob.
The display shows "Please Wait", immediately followed by "Completed" when the
If you want to cancel the move operation, move the cursor to "[CANCEL]" on the screen, and press the [MENU/ENTER] knob.
10)Press the [MENU/ENTER] knob.
The display now returns to the part edit menu screen, where “Move Part >” is highlighted.
11)Press the [STOP] key to exit the menu mode.
<Note>: If you are not satisfied with the re- sult, press the [UNDO/REDO] key to undo the operation (see page 111).