Copying/pasting the part(s)-2
You can copy the desired part(s) of the selected track(s) and paste it(them) to the other time position of the desired track(s). Unlike the method described above in "Copying/pasting the desired part(s) (1)", the part data is copied to the (virtual) clipboard and then pasted to the specified position of the other specified track(s).
The copy/paste operation of a part or parts can be made only within the current song.
LOCATE A | LOCATE B |
point | point |
ABS ZERO | REC END |
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
Clipboard
(Virtual)
LOCATE A
point
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
<Note>: If you paste the part(s) to the same time position of the other track(s), we recommend us- ing the method described above in "Copying/past- ing the desired part(s) (1)", because it works faster.
<Note>: You cannot copy/paste track data of a song protected. Release the protection before making the copy/paste operation.
<Note>: If you turn off the
Also note that you cannot undo copying data to the clipboard.
Copying to the clipboard
1)Load the song you want to edit.
2)Set the LOCATE A and LOCATE B points (see page 49).
You can check the edited part(s) by playing back between the LOCATE A and LOCATE B points (see page 44).
3)While the recorder is stopped, press the [MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the menu selection screen, where "<< Back" is highlighted initially (selecting "<< Back" returns to the previous screen).
4)Rotate the [MENU/ENTER] knob to select
"Part Edit >", and press the [MENU/ENTER] knob.
The display now shows the part edit menu screen, where "<< Back" is highlighted.
5)Rotate the [MENU/ENTER] knob to select "Copy Part >", and press the [MENU/ENTER] knob.
The display now shows the screen for selecting the source track(s). "<<Back" is initially highlighted.
