You can select the same number of tracks as the move source track(s). For example, if you select a mono track for the move source, you can only select a mono for the move destina- tion.
<Note>: You cannot select the same track(s) for the move source and destination.
7)Rotate the [MENU/ENTER] knob to select destination track(s), and press the [MENU/ENTER] knob.
“Dest. Track = *” is now highlighted on the screen.
<Note>: If you want to cancel the move opera- tion, move the cursor to "[CANCEL]" on the screen, and press the [MENU/ENTER] knob.
<Note>: If a destination track has recorded data, moving data overwrites the previous data.
8)Rotate the [MENU/ENTER] knob to move the cursor to "[ENTER]" on the screen, and press the [MENU/ENTER] knob.
The display shows "Please Wait", immediately followed by "Completed" when the
9)Press the [MENU/ENTER] knob.
The display now returns to the track edit menu screen, where “Move Track >” is highlighted.
10)Press the [STOP] key to exit the menu mode.
<Note>: If you are not satisfied with the re- sult, press the [UNDO/REDO] key to undo the operation (see page 103).
Exchanging whole track data
You can exchange whole data (from ABS ZERO to REC END) between the desired track(s).
ABS ZERO | REC END |
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
<Note>: You cannot exchange track data of a song protected. Release the protection before exchang- ing track data.
1)Load the song you want to edit.
2)While the recorder is stopped, press the [MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the menu selection screen, where "<< Back" is highlighted initially (selecting "<< Back" returns to the previous screen).
3)Rotate the [MENU/ENTER] knob to select
"Track Edit >", and press the [MENU/ENTER] knob.
The display now shows the track edit menu screen, where "<< Back" is highlighted.
