Fostex MR-8HD Using the reverb or delay, Selecting an effect type Selecting a delay type

MR-8HD Owner’s Manual (Using effects)

Using the reverb or delay

The MR-8HD has the original built-in reverb/delay processor featuring the newly-developed algorithm. You can apply the reverb or delay to playback signals of tracks 1 through 4 during mixdown and track bouncing.

Selecting an effect type			Selecting a delay type
You can select an effect type from among three		When you use the delay effect, you can select
reverb options (ROOM, HALL and PLATE) and		a delay type.
a delay (DELAY) by using the keys in the [EF-
FECT] section shown below.		1)	While the recorder is stopped, press the
			[MENU/ENTER] knob to enter the menu mode.
			The display now shows the first page of the
	EFFECT		menu selection screen, where "<< Back" is
	REVERB / DELAY TIME
			highlighted initially.

MIN MAX

ROOM HALL

ROOM HALL

	PLATE	DELAY
PLATE			DELAY
		2)		Rotate the [MENU/ENTER] knob to select
				"System", and press the [MENU/ENTER] knob.

Details of each effect type

The display now shows the system menu screen, where "<< Back" is highlighted.

	Simulates reverberation in a medium-sized
ROOM	room. When you select "ROOM", you can
	adjust the reverb time using the [REVERB/
	DELAY TIME] control.
	Simulates reverberation in a hall with moder-
HALL	ate early reflection.
	When you select "HALL", you can adjust the
	reverb time using the [REVERB/DELAY
	TIME] control.
	Simulates a plate reverb with a wide fre-
PLATE	quency range.
	When you select "PLATE", you can adjust the
	reverb time using the [REVERB/DELAY
	TIME] control.
	Adds delay effects. You can select the de-
	sired delay types using the "Delay Type" item
	of the System menu in the menu mode (you
	can easily access to the "Delay Type" setting
DELAY	screen by a long press of the [DELAY] key).
	Three delay types are available: Mono, L-R
	and Diff. See below for details.
	When you select "ROOM", you can adjust
	the delay time using the [REVERB/DELAY
	TIME] control.

3)Rotate the [MENU/ENTER] knob to select "DelayType" and press the [MENU/ENTER] knob.

The current delay type starts flashing and you can now select from among three options shown below ("L-R" is initially selected).

60