TC electronic SDN BHD M3000 user manual Combined Recall, Factory/User Presets, Preset banks

RECALL

Combined Recall

A Combined preset consists of a specific preset in Engine 1; a specific preset in Engine 2 and the routing between them.

Get acquainted with the different routings of the two Engines. Routing is an important setting when using both Engines.

(See "Routing" page 18).

As the standard Recall display, the Combined Recall display holds a few important parameters: The preset name; the Decay time for the two presets and the selected routing.

To Recall a Combined preset:

Press the Combined RECALL key and scroll through the presets using the ADJUST wheel. Press OK to recall when you find the preset you wish to use.

The preset number and the OK key will blink while you are pre- viewing, indicating that the shown preset is not yet recalled.

Factory/User Presets

The M3000 contains four different preset banks plus two additional Card banks.

Single ROM bank:

This bank contains 500 Single factory presets. The presets are available from Engine 1 and Engine 2.

Combined ROM bank:

The Combined bank contains 100 Combined factory presets. The presets are available from the Combined Recall.

Single RAM bank:

This bank can hold up to 250 of your Single presets.

Combined RAM bank:

The Combined RAM bank can hold up to 50 of your Combined presets (see Combined presets).

The RAM banks are located after the corresponding ROM banks. Scroll through the 500/100 ROM presets to enter the RAM bank. Note! Until you have stored one or more presets in the RAM bank the RAM bank will not be accessible.

Card banks:

Use a standard PCMCIA and you have a portable RAM bank containing up to 250 Single presets and 50 Combined presets.

SINGLE

500ROM PRESETS

250RAM PRESETS

250CARD PRESETS

COMBINED

100ROM PRESETS

50RAM PRESETS

50CARD PRESETS

Factory presets

Your own presets

Your own card presets

Use a S-RAM Type 1 PCMCIA with min. 64KB and max. 2MB of memory.

Press SHIFT and turn the ADJUST wheel one click clockwise or counter-clockwise to jump to the next preset section.

Example:

You have recalled any ROM preset between 1 and 250. Press SHIFT and turn the ADJUST wheel clockwise one click and you are now previewing preset 251.

Press SHIFT again and turn the ADJUST wheel clockwise one more click.

Preset banks

You are now previewing ROM preset 500.

Opposit moves are possible by pressing SHIFT and turning the ADJUST wheel counter-clockwise.

11