TC electronic SDN BHD M3000 user manual R.E, Reflections

C.O.R.E.

C.O.R.E.

The C.O.R.E. algorithm is a well-known TC Reverb from the M5000, and is very good on short to medium decay times. C.O.R.E. has all parameters present at first layer (meaning no Expert mode).

Try e.g. presets 69, 89 and 189 to experience the C.O.R.E algorithm.

Decay

Sets the Decay time. The value indicates the time to where the Reverb tail is damped to -60dB.

Early Level

Sets the Early Reflection level.

Reverb Level

Level of the Reverb tail.

Mix

Mix between direct and effect.

Out Level

Adjusts Output level. Use this parameter to match levels between presets.

Rev Delay

Determines how fast the reverberation will build up.

Pre Delay

The time to arrival of the first reflection.

Reflections

Room shape

Here you can choose between different room shapes. Changing the room shape will change the Early Reflections.

Size

Size multiplication factor. With this parameter you can change the size of the room. Only the Early Reflections are influenced by this factor.

Rev diff 1

Imposes the characteristics of the Early Reflections on the later reverberation.

Rev diff 2

Imposes the characteristics of the Early Reflections on the later reverberation.

Rev width

This parameter adjusts the stereo width of the Reverb tail.

Hi Cut level

Damping Ratio in dB of the Hi Cut filter.

Hi Damp

(0.01 - 2.5) Multiplier for the frequencies above the Hi Crossover frequency. Example: If the main Decay parameter is set to 2.0sec and the Hi Decay parameter is set to 1.5, frequencies above the Hi Xover will decay for 3.0sec. Conversely if this parameter is set to 0.5 the Decay time above the Hi Xover point will be 1sec.

Hi Decay

Adjusts the high frequency reverberation time.

Hi Crossover

Crossover frequency between mid and high band reverberation filter.

Lo Decay

Adjusts the low frequency reverberation time.

Lo Crossover

Crossover frequency between low and mid band reverberation filter.

45