TC electronic SDN BHD M3000 user manual Important Safety Instructions, Service

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

1Read these instructions.

2Keep these instructions.

3Heed all warnings.

4Follow all instructions.

5Do not use this apparatus near water.

6Clean only with dry cloth.

7Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11Only use attachments/accessories specified by the manufacturer.

12Unplug this apparatus during lightning storms or when unused for long periods of time.

13Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING

•To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

•This apparatus must be earthed.

•Use a three wire grounding type line cord like the one supplied with the product.

•Be advised that different operating voltages require the use of different types of line cord and attachment plugs.

•Check the voltage in your area and use the correct type. See table below:

Voltage	Line plug according to
	standard.
110-125V	UL817 and CSA C22.2 no 42.
220-230V	CEE 7 page VII, SR section
	107-2-D1/IEC 83 page C4.
240V	BS 1363 of 1984.
	Specification for 13A fused
	plugs and switched and
	unswitched socket outlets.

•This equipment should be installed near the socket outlet and disconnection of the device should be easily accessible.

•Do not install in a confined space.

•Do not open the unit - risk of electric shock inside.

Caution:

You are cautioned that any change or modifications not expressly approved in this manual could void your authority to operate this equipment.

Service

•There are no user-serviceable parts inside.

•All service must be performed by qualified personnel.

a