Technicolor - Thomson LDK 20(S)

Installation Technical Manual LDK 20(S) - Studio Camera 2-3

The camera is delivered in a ready-to-use state,

however, there are occasions when it might be

necessary to re-adjust some functions after, for

example, fitting a new lens.

A large number of functions can be set-up using the

control facilities of the menu system. In addition to this

software set-up there are some functions which can be

selected or adjusted internally in the camera.

Refer to the next chapters for instructions.

Location of adjustments

Turn the two screws on the left side panel 90°

counterclockwise and swing down the cover. Turn the

two screws on the right side panel 90° counterclockwise

and swing down the cover.

Hardware Setup and Customization

Unless mentioned otherwise the adjustments for

hardware setup and customization are located at the

side of the following modules:

1Front Module

2Video Processor 1

3Digital Video Processing

4Subboard DSP

5Sync. Shading

6Data Processor

7Power

8Video Miscellaneous

9Encoder

10 Video Mux Ext-TP Rec

11 Audio/Intercom TX-Rec

12 RTS Power Miscellaneous

12 8