Tefal P42214.99, P4221440, P4221438, P4221433, P4221431, P4221434 Minimum filling, Maximum filling

IFU Nutricook SEB TEFAL_9L 4135696:4135696 4/01/10 14:58 Page 58

•The control module comprises all of the components needed for your NutriCook to operate. Once mounted on the lid, your NutriCook can be used normally.

To remove the control module from the lid:

• Turn the lid over.

• Unscrew the module retaining nut using a coin, while holding the module in the other hand.

• The module holds the crown in place.

EN

To fit the control module on the lid:

•Position the crown on the lid, with the vent for the automatic air ventilation system (B) aligned over the

grey valve.

• Position the module, with the handle down, on the lid.

• Turn the complete assembly over while holding the module against the lid and tighten down the retaining nut using a coin.

The crown and control module will only fit one way.

Never use NutriCook without the crown.

Food placed in the steaming basket must not touch the NutriCook lid.

Minimum filling

When cooking directly in the cooker:

•Always pour a minimum amount of liquid of at least 250 ml (two glasses) into the NutriCook. Fig 3.

For steaming:

•At least 750 ml of water must be poured in.

•Place your steaming basket filled with food into the bottom of the cooker. Fig 5.

If your NutriCook was heated without any liquid inside:

•Have your NutriCook inspected by a SEB/Tefal Approved Service Centre.

Maximum filling

•Never fill your NutriCook more than two-thirds full (the maximum mark). Fig 4.

For some food

•For food that expands during cooking, like rice or dried vegetables or stewed fruit, never fill your NutriCook more than half full. Fig 6.

53