Tefal P42214.99 Regulation markings, SEB/Tefal answers your questions, Problems Recommendations

IFU Nutricook SEB TEFAL_9L 4135696:4135696 4/01/10 14:58 Page 68

Regulation markings

EN

Marking	Location
Manufacturer's identification or	Decorative crown.
trademark.
Year of manufacture, Equipment	On the top of a jaw, visible when the cover is
identification / model reference.	in the "Open" position.
Max. operating pressure	On the control module, when the module is
Max. safety pressure.	removed from the lid.

Capacity.

On the outside of the NutriCook pan.

SEB/Tefal answers your questions

Problems	Recommendations
If you cannot close the lid: Check that the Open/Close handle is in the vertical
	position.
	Check the way up the seal is fitted, see the "Cleaning
	and Maintenance" heading.

OK NO

If the NutriCook has	Have your NutriCook inspected by a SEB/Tefal
heated up under pressure	Approved Service Centre.
with no liquid inside:
If the pressure indicator	Check that:
did not rise and nothing	- The cooking program selector is set to one of the
escapes from the valve	cooking programmes.
during cooking:	- Your NutriCook is properly closed.
If the pressure indicator	This is normal for the first few minutes.
has risen but still nothing	If the problem persists, select the		programme. Wait
escapes from the valve	for the pressure indicator to drop	then move the
during cooking:	Open/Close handle to the vertical position.
	Clean the operating valve and steam release outlet
	under running water and check that the safety valve
	moves: Fig 17. See the "Cleaning and Maintenance"
	heading.

63