Tefal P4221433, P4221440, P4221438, P42214.99, P4221431, P4221434 manual Environment protection first

IFU Nutricook SEB TEFAL_9L 4135696:4135696 4/01/10 14:59 Page 69

Problems	Recommendations
If steam escapes from	That the lid is properly closed.
around the lid, check:	The position of the lid seal is the correct way up.
	That the seal is in good condition, and if necessary,
	replace it.
	That the lid, the seal, its seat in the lid are clean.
	That the edge of the NutriCook pan is in good
	condition.
If steam escapes from	That the seal is not caught between the body and the
around the lid together with	lid.
a piercing noise, check :
If you cannot open the lid:	Check that the selector is set to .
	Check that the pressure indicator is down.
	If not: release pressure.
	Never tamper with this pressure indicator.
If food is not cooked or has	The cooking time is correct.
burnt, check:	The heat level was neither too low nor too high.
	That the cooking program selector was in the right
	position.
	The amount of liquid was sufficient for the cooking
	time.
If food has burnt in the	Fill the pan with water and leave the NutriCook to
NutriCook:	soak for a while before washing.
	Never use bleach or chlorine products.
If one of the safety	Turn off the heat.
systems is triggered:	Leave the NutriCook to cool down without moving it
	or turning the programme selector (F) to the steam
	release positon.
	Wait for the pressure indicator to drop down and
	open the NutriCook.
	Check and clean the operating valve, the steam
	release outlet, the safety valve and the seal.
	If the fault persists, have your NutriCook inspected by
	a SEB/Tefal Approved Service Centre.

EN

Environment protection first !

￿Your appliance contains valuable materials which can be recovered or recycled.

Leave it at a local civic waste collection point.

64