IFU Nutricook SEB TEFAL_9L 4135696:4135696 4/01/10 14:58 Page 57

SEB/Tefal accessories

•The following NutriCook accessories are available from shops:

Accessories

Reference numbers

 

 

Lid seal 8 L

X1010003

 

 

Timer

X1060003

 

 

•To replace other parts or have repairs performed, EN please call on your local SEB/Tefal Approved Service Centre.

•Only use SEB/Tefal genuine parts designed for your product model.

Opening

•Make sure that the cooking programme selector (F) is in theposition and that the pressure indicator is down.

•Move the handle from the horizontal to the vertical position (the jaws open): Fig 1.

•Lift the lid.

During Opening/Closing operations, the control module must be in place on the lid.

The jaws must be in contact with the edge of the lid.

Closing

•Make sure that the cooking programme Selector (F) is in the [pictogram steam release] position and the Opening/Closing handle (E) is in the vertical position.

•Place the lid on the pressure cooker, taking care to ensure that it is correctly positioned.

•Move the Open/Close handle from the vertical to the horizontal position. Fig 2.

•Apply a little force at the end when closing to trigger the locking mechanism.

•Once in the closed position, it is normal that the lid can turn freely on the NutriCook pan.

If you cannot close the lid:

•Check that the Open/Close handle is in the vertical position.

•Check that the seal is in place properly.

Control module

•The removeable control module is designed to make it easier to clean your NutriCook.

•Once you remove the timer, the pan and lid are dishwasher safe.

52