2 in1

ACTIFRY2EN1_1505087478_Mise en page 1 28/02/12 12:54 Page11

Using the 2in1: bowl + tray Get your food ready

Open the lid – fig.1.

Remove the 2in1 spoon and the tray – fig.3.

Lift the handle up - fig.4 and remove the bowl from the appliance

Place your food in the bowl making sure you always keep to the quantities recommended in the cooking tables and/or the recipe book

(please see “Cooking table”). Never exceed the "MAX“ level marker on the paddle – fig.10.

Depending on the food, add the recommended amount of fat in a spoon and pour the contents evenly in to the bowl – fig.11

Put the bowl back in the appliance and close the lid.

Fold away the handle – fig.12.

EN

FR

EL

AR

There is a pre-set time for each type of food which you can adjust.

When you are not using it, the appliance will automatically switch itself off after 10 minutes.

FA

Start 2in1 cooking

• Connect detachable power cable to the appliance and plug it in

fig.13.

Push the switch 0/ , the appliance will make a beep sound and the screen displays 00 – fig.14.

Adjust the total cooking time (=cooking the food in the bowl) using

the buttons (see “Cooking table“) – fig.15.

Select the type of food you want to cook in the tray using the button

2 in1 – fig.23 and 24.

Adjust the cooking time for the tray using the buttons (please see “Cooking table”).

Push the start button 2 in1 . The cooking starts.

The minute by minute countdown starts.

Place the food on the tray making sure you don’t exceed the maximum

level – fig.22.

When the appliance beeps and stops automatically, open the lid and put the tray in – fig.25.

Close the lid again and press the start button 2 in1 .

The countdown resumes.

Remove your food

When cooking is finished, the timer will sound and the screen will start blinking and displaying 00: the appliance automatically stops cooking

your food. You can stop the buzzer by pressing on the start button

– fig.19.

Open the lid – fig.20.

Lift up the handle until you hear the “CLICK” – fig.21.

Disconnect the two handles by pressing the button 10b.

Turn over the tray handle so that it can fit on to the tray – fig.26.

Remove the tray and take your food out – fig.27.

Remove the bowl and take your food out.

Be careful, because the tray is very hot after cooking. Always use the tray handle to remove it. If you want even crispier fries, you

can cook them for a further 2 minutes after you’ve removed the tray.

11

Page 10
Image 10
Tefal YV960015, YV960032 manual Using the 2in1 bowl + tray Get your food ready, Start 2in1 cooking, Remove your food