Tefal YV960032 Using the bowl on its own Start cooking, Remove the food, Will quickly disappear

ACTIFRY2EN1_1505087478_Mise en page 1 28/02/12 12:54 Page7

• All these detachable parts are dishwasher friendly – fig.9 or can be	When using the appliance
cleaned with a non-abrasive sponge and some washing-up liquid.	for the first time you may
• Dry thoroughly before putting back.	notice a harmless smell. This

• Adjust the position of the paddle until you hear a “CLICK” sound – smell, which will not affect

fig.8b	the appliance in any way,
	will quickly disappear.

EN

FR

When using the bowl on its own, never place the tray in the appliance.

Do not use the paddle without the bowl.

Prepare the food

•Open the lid – fig.1.

•Remove the 2in1 spoon – fig.3 and the tray – fig.7.

•Lift the handle up – fig.4 and remove the bowl from the appliance.

•Place your food on the tray making sure you always keep to the quantities recommended in the cooking tables and/or the recipe book

(please see: “Cooking table”). Never exceed the "MAX“ level marker

– fig.10.

•Depending on the food, add the recommended amount of fat in the spoon and pour the contents evenly in to the bowl – fig.11.

•Put the bowl back into the appliance and close the lid.

•Push the handle back – fig.12.

EL

AR

FA

Using the bowl on its own Start cooking

•Connect the detachable power cable to the appliance and plug it in

– fig.13.

•Push the switch 0/ – fig.14,the appliance will make a beep sound and the screen displays 00.

•Adjust the cooking time using the buttons – fig.15 (see “Cooking table“).

•Press the start button – fig.16. The minute countdown starts. The countdown will only be displayed in seconds when there is less than a minute left.

•You can adjust the cooking time at any time by pressing on the buttons

– fig.17.

Opening the lid stops the cooking. You can start cooking again by pressing on the start button after it has been switched off. Once the lid has been open for 2 minutes the appliance will go into stand-by mode.

Remove the food

•When the cooking is finished, the timer will sound and the screen will start blinking and displaying 00 – fig.18: the appliance automatically

stops cooking your food. You can stop the buzzer by pressing on the

start button – fig.19.

•Open the lid – fig.20.

•Lift the handle up until you hear the “CLICK” sound – fig.21.

•Remove the bowl and take the food out.

7