Acquiring Waveforms
CSA7000 Series, TDS7000 Series, & TDS6000 Series Instruments User Manual 3-61
Overview Control elements and resourcesTime stamping frames (Cont.)
Select the
reference
frame
4. In the Time Stamps controls, touch Source and select
the source of the reference frame.
5. In the Time Stamps controls, touch Frame and use the
general purpose knob or keypad to enter the number of
the reference frame. This value sets the starting frame
when measuring the relative time between two frames.
Select the
FastFrame
and time
stamps
selection
controls
You may set the Selected Frame and Reference Frame
as previously shown or you can set them from the
Selection Controls window.
6. Touch Selection Controls from the Time Stamps control
window to display the FastFrame controls.
7. In the FastFrame controls window, touch Selected
Frame Source and select the source of the frame you
want to view.
8. Touch Selected Frame Frame and use the general
purpose knob or keypad to enter the number of the
specific frame you want to view and take time stamps
on. The frame you select appears on the display.
Note. The is the selected time stamp minus the
reference time stamp.
9. Touch the Reference Frame Source and select the
source of the reference frame. Touch Frame and use the
general purpose knob or keypad to enter the number of
the reference frame.