CSA7000 Series, TDS7000 Series, & TDS6000 Series Instruments User Manual 3- 245

Data Input/Output

This section describes the input and output capabilities of your instrument.
Specifically, it covers:
HSaving and Recalling a Setup on page 3--245
HSaving and Recalling Waveforms on page 3--253
HExporting and Copying Waveforms on page 3--262, including exporting and
copying of images, waveforms, measurements, and histograms
HPrinting Waveforms on page 3--277
HRemote Communication on page 3--282

Saving and Recalling a Setup

This instrument can save a number of different instrument setups for later recall,
limited only by the space you have to store the setups.
By saving and recalling different setups, you can switch from setup to setup
without having to first manually record your settings and then manually set
them. This capability is helpful when you want to:
HSave and recall a setup that optimizes the instrument for displaying and
analyzing a certain signal.
HSave a series of setups to help automate a procedure through recall of a
sequence of saved setups as part of performing the procedure.
HExport a setup for sharing with a second instrument.
The Save-Setup and the Recall-Setup control windows provide for including and
viewing comments with your saved setups. You can store information, readable
upon recall, that describes each setup you save and its intended application.