Appendix A: Specifications
CSA7000 Series, TDS7000 Series, & TDS6000 Series Instruments User Manual A-3
Acquisition Control. Acquire continuously or set up to capture single shot
acquisitions. Enable or disable optional acquisition features such as equivalent
time or roll mode. CSA7000 Series & TDS7000 Series only: Use Fast Frame
acquisition to capture and time stamp many events in a rapid sequence.
Horizontal Delay. Use delay when you want to acquire a signal at a significant
time interval after the trigger point. Toggle delay on and off to quickly compare
the signal at two different points in time.
Optical-to-Electrical Converter. CSA7000 Series only. Test optical signals using
the integrated optical-to-electrical converter and a fully calibrated signal path.
Recovered clock and data signals are available. Optical reference receivers are
available for selected optical communications standards.
Average, Envelope, and Hi Res Acquisition. Use Average acquisition mode to
remove uncorrelated noise from your signal. Use Envelope to capture and
display the maximum variation of the signal. Use Hi Res to increase vertical
resolution for lower bandwidth signals.
Waveform Math. Set up simple math waveforms using the basic arithmetic
functions or create more advanced math waveforms using the math expression
editor. Waveform expressions can even contain measurement results and other
math waveforms.
Spectral Analysis. Display spectral magnitude and phase waveforms based on
your time-domain acquisitions. Control the instrument using the traditional
spectrum analyzer controls such as span and center frequency.
Color LCD Display. Identify and differentiate waveforms easily with color coding.
Waveforms, readouts, and inputs are color matched to increase productivity and
reduce operating errors. Enhance visualization of waveforms with color grading.

Signal Processing

Features

Display Features