Data Input/Output
CSA7000 Series, TDS7000 Series, & TDS6000 Series Instruments User Manual 3- 251
Use the procedure that follows to recall a setup to the instrument. Remember that
recalling a setup replaces the existing setup, which is lost.
Overview To recall your setup Control elements and resources
Prerequisites 1. The instrument must be powered up. You must have
access to a setup saved by the instrument.
Note. This procedure does not make the setup active.
See Powering On the Instrument on page 1--9.
Display the
setups control
window
2. From the toolbar, touch Setups and select the Recall
Setups tab of the Setups control window.
Recall the setup 3. Touch the number of the setup that you want to recall.
The current instrument setup is overwritten.
Recall setup
from a file
4. To display the Recall Instrument Setup dialog, from the
Recall Setup control window, touch Recall. (See right.)
The Recall Instrument Setup dialog allows navigation to
directories, lists setup files in the directory, and provides
for selection of a setup file.
Find the
source
directory
5. Use the Look in: drop-down list and buttons (see right)
to navigate to the directory, which contains a setup that
you want to recall.

To Recall Your Setup