Tektronix TDS7054, TDS7104, TDS7154, TDS7254, TDS7404 Appendix C: Menu Bar Commands

CSA7000 Series, TDS7000 Series, & TDS6000 Series Instruments User Manual C-1

Appendix C: Menu Bar Commands

Both the instrument menu bar and a toolbar allow you to control instrument

operation. Where possible, this manual describes operation using first, the front

panel and then, the toolbar. This appendix describes functions available from the

menu bar. For more information about these commands, see the online help.

Table C--1 lists the commands available from the File menu on the menu bar.

Table C- 1: File menu commands

Menu Submenu Function

Reference Waveforms Reference Setup

Display On/Off

Position/Scale

Label

Save Wfm

Save All Wfm

Recall Wfm

Delete All Refs

Displays the Reference Setup window that you use to set up and control

reference waveforms

Displays the Waveform Display control window that you can use to turn the

display of waveforms on and off

Displays the control window that you use to position the waveform and set the

vertical scale

Displays a control window that you use to label your waveforms

Displays the Reference Setup window that you use to save and control

reference waveforms

Displays the window that you use to save all reference waveforms

Displays the Reference Setup window that you use to recall and control

reference waveforms

Deletes all reference waveforms

Instrument Setup Displays the Instrument Setup window that you use to save instrument setups to

nonvolatile memory or to a file, recall saved setups, or delete saved setups

Recall Default Setup Recalls the factory default instrument setup