Data Input/Output

CSA7000 Series, TDS7000 Series, & TDS6000 Series Instruments User Manual 3- 273

Overview Control elements and resourcesTo use exported waveforms (Cont.)

For further

assistance

9. For more help on exporting waveforms, touch the
Help button in the window to access contextual online
help.
See page 3--283 to learn about accessing online help.

Use the procedure that follows to copy a waveform to the clipboard.

Overview To save a waveform Control elements and resources
Prerequisites 1. Make sure the waveform, image, or measurement to be
copied exists; that is, your source must be a channel, an
active math waveform, an active reference, and so forth.
HSee Powering On the Instrument on page 1--9.
HSee page 3--34 for acquisition setup.
HSee page 3--71 for trigger setup.
Select for copy 2. From the menu bar, select Edit, and then select Select
for Copy. See right.
The menu lists all available waveform, image, and
measurement types available for export:
HFull Screen to export a bitmap of all screen
contents
HGraticule to export a bitmap of only the graticule
area
HWaveform to export waveform data
HMeasurements to export measurement data
Select setup for
copy
3. From the menu bar, select Edit, and then select Copy
Setup to display the Copy Setup control window.

To Copy Your Waveform