Teledyne T803 5.10.5. ADDING A RECORDER OFFSET TO AN ANALOG OUTPUT

Teledyne API T803 CO2/O2 Analyzer Operation Manual Setup Menu
95
5.10.5. ADDING A RECORDER OFFSET TO AN ANALOG OUTPUT
Some analog signal recorders require that the zero signal be significantly different
from the baseline of the recorder in order to record slightly negative readings
from noise around the zero point. This can be achieved in the T803 by defining a
zero offset, a small voltage (e.g., 10% of span).
To add a zero offset to a specific analog output channel, select the ANALOG I/O
CONFIGURATION submenu (see Section 5.10.1) then press:
07276B DCN6418