Tiger Products Co., Ltd TS 100A manual Assembly, Tractor Preparation

ASSEMBLY

Before attempting to mount or service your Tiger mower, it is important to read and understand all of the information in the Safety section of this manual.

Check complete shipment list against the packing list to make sure there are no shortages. Make certain the tractor model is the appropriate one for the mower received!

Use a floor jack, hoist or fork lift to lift or raise heavy parts whenever possible whether mentioned or not.

Read and understand the entire assembly section instructions before attempting to mount your Tiger mower. Refer to the parts section of this manual for detailed illustrations to locate all parts.

TRACTOR PREPARATION

A:Remove right hand steps.

B:Disconnect battery cables.

C:Remove battery, battery box and existing bracket.

D:Remove engine side panels, or raise hood to access front pulley.

E:Remove plugs from tractor casting where main frame and pump mount will be attached.

F:Install battery bracket supplied in the kit using existing hardware.

Assembly Section 2-2