Tiger Products Co., Ltd TS 100A manual Assembly Mirror Mount, Front Worklamp Relocation

ASSEMBLY

MIRROR MOUNT

1.Remove the existing mirror bracket and mirror from the cab.

2Remove the mirror and knob from existing bracket.

3.Install the supplied bracket using supplied hardware on the cab as shown below.

4.Install the mirror with the knob on the supplied bracket as shown below. Refer the parts section for details.

FRONT WORKLAMP RELOCATION

1.Cut the right side front hand rail from the bottom of worklamp to the bottom of the hand rail.

2 Bend the hand rail inside to avoid the boom collision with the worklamp.

Assembly Section 2-7