ASSEMBLY
EXHAUST MOUNT
NOTE: This should be done after mounting the main frame.
1.Cut the tractor hood as shown in pic. # 1 to accomodate modified exhaust turbo tube.
2 Remove the muffler from existing turbo tube.
3.Remove existing turbo tube from tractor turbo.
4.Install the exhaust mounting bracket and supporting brace.
5.Cut the existing tube at turbo end
6.Install the turbo end of existing tube to the tractor turbo.
7.Connect the supplied tube to the turbo end of existing tube using the sealing clamp as shown in pic. # 4. Do not tighten the hardware.
8.Install the exhaust clamp to the exhaust mounting bracket with the supplied hardware. Refer parts section for the details.
9.Tighten the turbo existing hardware first and then the rest of the hardware.
10.Cut the muffler sweep off at the top and replace with a raincap, if necessary for shipping, as shown in pic. # 5. Then install muffler to the turbo tube with the existing hardware.
Picture # 1
Picture # 2 | Picture # 3 |
Assembly Section
