TOA Electronics SCP-2700 TurningYour Phone On and Off, Batteryand Charger, TurningYourPhoneOn

TurningYour Phone On and Off

TurningYourPhoneOn

▶Press and hold .

Once your phone is on and finds a signal, it automatically enters standby mode – the phone’s idle state. At this point, you are ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.

In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for Sprint service by pressing any key except numbered keys.

Tip	The Power Save feature conserves your battery
	power when you are in an area where there is no
	signal.

TurningYourPhoneOff

▶Press and hold for two seconds until you see the powering-down animation on the display screen.

Your screen remains blank while your phone is off unless the battery is charging.

Batteryand Charger

WARNING	Use only Sprint-approved or Kyocera-
	approved batteries and chargers with your
	phone.The failure to use a Sprint-approved
	or Kyocera-approved battery and charger
	may increase the risk that yourphone will
	overheat, catch fire, orexplode, resulting in
	serious bodily injury, death, orproperty
	damage.

Sprint-approved or Kyocera-approved batteries and accessories can be found at Sprint Stores or through Kyocera; or call 1-866-866-7509 to order. They’re also available at www.sprint.com.

14 2A. Phone Basics